This same software also scales up the Element range, for the larger Element 46 and 88 models. Apogee Electronics was founded in December 1985 by audio. When I say 'communication' in this case, it means 'control command exchange' between UE and network, not the data traffic. This software is fairly comprehensive, with options to control each of the inputs and outputs, changing the inputs from Mic to Line, setting the gain and Phantom Power, and to create custom mixes for the headphones and main outputs.Įven with only two analogue inputs and two pairs of analogue outputs on the Element 24, this software can prove useful for zero-latency monitor mixing but should you make use of the ADAT I/O as well, you could create a variety of custom mixes for different purposes, perhaps tying in external effects such as reverb for monitoring – all the while recording only the dry performance. Apogee Control Hardware Remote connects directly to your Mac using a simple USB cable. MAC CE (MAC Control Element) When we say 'communication between UE and Network', we normally think about only signaling message (RRC or NAS message). To use the Element 24, then, we had to first install Apogee’s Element Control software. There are no screens, no buttons and no pots whatsoever on the unit itself. Instead, it is designed as a desktop unit with two combo TRS/XLR inputs and a 1/4-inch headphone output on the front, while the back houses two XLR ports for the main analogue outputs, optical I/O, Word Clock I/O, a Thunderbolt port and a DC power socket.Īnd that’s it. The unit itself is just over a half-rack width, and is thin enough to be placed on a rack shelf but doesn’t come with any rack ears for mounting directly.
0 Comments
Leave a Reply. |